Browse ASCE's extensive list of engineering titles—Standards, Manuals of Practice, and Proceedings, plus ASCE Press and technical reports—for works to expand your professional knowledge and enhance your career!

Compaction Grouting Consensus Guide (ASCE/G-I 53-10)

This guide focuses on the practical and engineering aspects of compaction grouting as a technique of ground improvement. Compaction grouting increases the density, strength, and stiffness of the ground through slow, controlled injections of low-mobility grout that compacts the soil as the grout mass expands. The technology can be applied to a wide range of soils, in most cases being used to improve the engineering properties of poorly compacted fills and loose native soils. Compaction grouting can be applied equally well above or below the water table.  

Ultrafine Cement in Pressure Grouting

This books presents the technical and practical information required by engineers to plan and implement grouting programs that are cost effective and technically sound. As a key component of modern grouting programs, ultrafine cement is an ideal solution for geotechnical engineers and construction contractors who are grappling with the challenges of managing costs while developing sites that may be less than ideal. Increasingly, the virtues of ultrafine cement lead engineers and contractors to use it rather than less-expensive portland cements.

Recently Published Titles

ASCE Press
Water Balance Covers for Waste Containment: Principles and Practice
Project Administration for Design-Build Contracts: A Primer for Owners, Engineers, and Contractors
Wind Loads: Guide to the Wind Load Provisions of ASCE 7-05
View More...

Committee Reports
Footprint Design Manual for Local  Roads
Wind Storm and Storm Surge Mitigation (CDRM 4)
Effects of Urbanization on Groundwater: An Engineering Case-Based Approach for Sustainable Development
View More...

Standards
Structural Design of Interlocking Concrete Pavement for Municipal Streets and Roadways (58-10)
Standard Guideline for the Geostatistical Estimation and Block-Averaging of Homogeneous and Isotropic Saturated Hydraulic Conductivity (54-10)
Minimum Design Loads for Buildings and Other Structures (7-10) (Book)
View More...

Conference Proceedings
Earth Retention Conference 3 (GSP 208)
Traffic and Transportation Studies (ICTTS 2010)
Integrated Transportation Systems: Green, Intelligent, Reliable (ICCTP-NACOTA 2010)
View More...

Manuals of Practice
Safe Operation and Maintenance of Dry Dock Facilities
Trenchless Renewal of Culverts and Storm Sewers (MOP 120)
Inspecting Pipeline Installation (MOP 117)
View More...