Search ASCE Technical Sessions
| Thursday, May 29 |
Concurrent Technical Sessions - Period 1
10:30 AM - 12:00 PM |
| Track: Advanced Technologies. Materials and Methods |
Simulating the Effects of Earthquakes: The NEES Program
Presentations:
Implementation of a Multi-Axial Subassemblage Testing (MAST) Laboratory System
Arturo Schultz Civil Engineering, University of Minnesota
Catherin French Civil Engineering, University of Minnesota
Jerry Hajjar Civil Engineering, University of Minnesota
Carol Shield Civil Engineering, University of Minnesota
Robert Dexter Civil Engineering, University of Minnesota
Doug Ernie University of Minnesota
David Du Univerity of Minnesota
Craig Polley University of Minnesota
Overview of the Construction Status of the George E. Brown, Jr. Network for Earthquake Engineering Simulation
Thomas Anderson/Pauschke Civil and Mechanical Systems, Nationl Science Foundation
The Development of the NEES Consortium
Robert Reitherman CUREE
Upgrading Oregon State's Multidirectional Wave Basin for Tsunami Research
Solomon Yim Civil Engineering, Oregon State University
| Track: Design, Analysis, Repair, and Rehabilitation |
Timber Design in the Northwest
Sponsoring Committee: ASCEs Committee on Aesthetics in Design
Presentations:
Contemporary Trends in Timber Design in the Northwest: Case Studies
Gary Swensen Swensen Say Fagel
The Structure, Aesthetics, and Symbolism of Wood in Northwest Architecture
Tom Harrison Structural Department, OWPIP
Transforming Clients Visions into Reality: Innovations in High-End Heavy Timber Design
David Eisenman KPFF Consulting Engineers
Structural Gluing in an Architectural Context
Gordon Plume The G.R. Plume Company
| Track: General Structural Issues |
Designing and Evaluating Structures for Protection from Terrorist Threats
Presentations:
Analysis and Design of Structures to Withstand Terrorist Attack
William H Zehrt US Army Engineering and Support Center
Patrick Acosta US Army Engineering and Support Center
Analysis of Masonry Bearing Walls to Blast Threats
Dr Mohammed M Ettouney Weidlinger Associates,Inc.
Peter DiMaggio Weidlinger Associates,Inc.,
Adam Hapij Weidlinger Associates,Inc.
Half-Scale Steel Stud Walls Subjected to Blast Environment
Billy W Bullock U.S.Army Corps of Engineers
Stanley C Woodson U.S.Army Corps of Engineers
Retrofit Design and Analysis of Fabric Blast Shield Resist Terrorist Threats
Kenneth B Morril Karagozian &Case
John Crawford Karagozian &Case
Simplified and Advanced Methodology for Determining the Response of Buildings to
Aircraft Impact
Dr Howard Levine Structures &Applied Science Divisions
Darrell Lawver Structures &Applied Science Divisions
Matthys Levy Structures &Applied Science Divisions
Dr Najib Abboud Structures &Applied Science Divisions
Simplified and Advanced Methodology for Determining the Response of Buildings to
Aircraft Impact
Darren Tenant Structures &Applied Science Divisions
| Track: Performance Based Design |
Practical Development of Seismic Protective Systems
Presentations:
Conceptual Infill Panel Designs for Seismic Retrofitting
Amjad Aref Civil,Structural &Environmental Engineering
Woo-Young Jung Civil,Structural &Environmental Engineering
Experimental Verification of Smart Coupled Building Control
Richard E Christenson Division of Engineering
Fuzzy Modeling of 30-ton Magnetorheological Damper Behavior
Paul Roschke Civil Engineering
Visit Likhituangsilp Civil Engineering
Response Control of Tall Benchmark Building Using Smart Tuned Mass Damper
Nadathur Varadarajan Structures
Satish Nagarajaish Civil and Environmental Engineering
| Track: Professional Practice |
Steel Bridge Forum 1 Seismic Design Issues
Presentations:
Cost Effective Design and Detailing of Steel Bridges
Vasant Mistry Bridge Division
Seismic Design of Steel Bridges
Ian Buckle Civil Engineering
Ahmad Itani Department of Civil Engineering
Lyle Carden Department of Civil Engineering
| Track: Transportation Structures |
Integral Bridge Piers and Bridge Girder Continuity
Presentations:
Integral Bent Caps for Girder Bridges
Ed Wasserman Structures, TDOT
Integral Concrete Piers for Steel Girder Bridges in Seismic Regions
Wadgy Wassel Modjeski-Master, Inc.
Dustin Davis Modjeski-Masters, Inc.
S. Sritharan Civil and Construction Engineering, Iowa State University
Lowell Greimann Civil and Construction Engineering- Iowa State University
Robert Abendroth Civil and Construction Engineering, Iowa State University
Steel Stringers Made Continuous for Live Load
Dennis Mertz Civil & Environmental Engineering, University of Delaware
|
|
