- Airfield Pavement- Layered Elastic Flexible Design
- Asphalt Pavement Preservation and Rehabilitation
- Gravel Roads - Design and Maintenance
- Hot Mix Asphalt Mix Design
- Hot Mix Asphalt Pavement Construction
- Innovative Bicycle Treatments - on CD!
- An Introduction to Roadside Delineation and Safety Systems - on CD!
- The Modern Roundabouts As a Traffic Signal Alternative - 2 Part Series
- On Site Circulation for Commercial Development
- Roadside Design
- Signalized Intersection Safety - on CD!
- Traffic Calming - on CD!
- Unpaved Low Volume Road Design, Construction and Maintenance
- Work Zone Traffic Control
 Book |
 CD-ROM |
 DVD |
 Audiotape |
 Videotape |
 Online |
Airfield Pavement- Layered Elastic Flexible Design This webinar describes the new pavement design procedure currently in final development by the Federal Aviation Administration (FAA). The design procedure is contained in a software package known as LEDFAA V1.3, and was approved for use by the FAA on April 30, 2004. Many airports and engineering consultants are currently using the program to assist them in preparing pavement designs for airfields which accommodate aircraft not addressed in the historic design procedures. The seminar discusses the underlying principles of the design procedure and provides a detailed demonstration of the program. 1 hour.
0.1 CEUs $75M/$125NM 7AFP
Order Online!
Asphalt Pavement Preservation and Rehabilitation This course will assist an engineer in the development of the most reliable and cost-effective rehabilitation alternatives for asphalt pavements. The video is broken into two units: pavement management concepts and pavement rehabilitation procedures. The first unit will address pavement management concepts at the project level which will include an overview of pavement management, pavement structural and condition assessment, distress mechanisms for Hot Mix Asphalt and project evaluation. The second unit will provide information on pavement rehabilitation through pavement maintenance techniques, surface rehabilitation procedures, recycling of asphalt pavements and asphalt overlays. 5 hours.
0.5 CEUs. $240/$7251 P20
Order Online!
Gravel Roads - Design and Maintenance This program presents clear and helpful information for doing a better job of designing and maintaining gravel roads. Based on FHWA's Gravel Roads Design and Maintenance Manual, this CD reviews guidelines for the design and maintenance of gravel roads. It will benefit highway engineers, elected officials, managers, and grader operators who are responsible for designing and maintaining gravel roads 1 hour.
0.1 CEUs. $75M/$125NM. A78
Order Online!
Hot Mix Asphalt Mix Design A discussion of the new Superpave mix design method is provided. Some of the topics covered include: Historic development of Asphalt Grading Systems, Superpave Binder tests, Superpave Binder Grading and Specifications, and History of mix design. 10 hours.
1.0 CEUs. $480/$1199.1 L08
Order Online!
Hot Mix Asphalt Pavement Construction This course provides information on plant production, placement, and compaction of Hot Mix Asphalt. Topics covered include: plant operation, placement and compaction, statistical specifications, and quality control and assurance testing. 5 hours.
0.5 CEUs. $240/$579.1 L09
Order Online!
Innovative Bicycle Treatments In March 1999, the Institute of Transportation Engineers (ITE) initiated the formation of a Pedestrian and Bicycle Task Force to develop better information for transportation professionals on pedestrian and bicycle facilities. In the summer of 2001, the Task Force became an ITE Council. One of the projects identified by the Task Force members was the need to provide better information on bicycle innovations. Many jurisdictions are employing new bikeway and bicycle parking design treatments. The intent of this report is to identify innovations and share information on their applications, advantages and disadvantages. The webinar-on-CD is co-sponsored by ASCE's Transportation & Development Institute and ASCE Continuing Education.
0.1 CEUs. $75M/$125NM. CD08
To review entire brochure in PDF Format.
Order Online!
An Introduction to Roadside Delineation and Safety SystemsThis webinar-on-CD will focus on how roadsides, especially in rural areas, should be delineated to prevent drivers from leaving the roadway. The use of edge lines, delineators, chevron signs and object markers will be addressed. The second half of the presentation will concentrate on safety systems aimed at reducing the severity of crashes once the road user has left the roadway. Shoulder and centerline grooving, guard rails/ median barriers and their end treatments, runaway truck escape ramps will be discussed. The importance of providing clear zones and breakaway devices will also be discussed. 1 hour.
0.1 CEUs. $75M/$125NM. 66999
To review entire brochure in PDF Format.
Order Online!
The Modern Roundabouts As a Traffic Signal Alternative - 2 Part Series About 65% of all crashes in urban areas, and 40% of all crashes in rural areas, occur at or near intersections or driveways. Because crashes are typically complex events, a great diversity of mitigation measures have been tried with varying degrees of success, including the so-called modern roundabout. This webinar on CD focuses on the best practices for designing roundabouts that maximize the safety of all road users. Lessons learned from the results of recent research are shared as well as the best sources of information about roundabouts. Examples are shown of recent roundabout installations in Europe as well as the U.S.A. Also covered are the concept of turbo roundabouts and the proposed MUTCD changes on how roundabouts are to be signed and marked. 2 hours
0.2 CEUs $149M/$199NM. 7RBI
Order Online!
On Site Circulation for Commercial Development This webinar-on-CD provides hands-on training for engineers and planners on how to effectively and safely design sites serving new and existing office and commercial developments, taking into consideration the needs of all road users (motorists, pedestrians, and bicyclists). It also provides a sound technical foundation for preparing materials needed to process development projects. Necessary tools and good practices for providing good on site circulation, from the perspectives of both the agency and the developer proposing the project, are covered. This webinar-on-CD is co-sponsored by ASCE's Transportation & Development Institute and ASCE Continuing Education. 1 hour.
0.1 CEUs. $75M/$125NM. 66996
Order Online!
Roadside Design In this online course industry veteran Lou Stephens, P.E., covers the gamut of roadside design engineering. Weaving his 31 years of experience with a rich variety of charts, graphics, personal stories, photos, and text, Lou will teach you how to select the right roadside device for various design conditions, as well as proper roadside construction and maintenance techniques. Covers the basics of roadside design, the clear zone, economics, roadside barriers, end treatments, crash cushions, bridge rails, median barriers, and work zones. 7 hours.
7.0 PDHs. $345 M/$395 NM V58
To review entire brochure in PDF Format.
Supplemental course Materials: It is recommended that you purchase AASTHO's Roadside Design Guide, the text used to teach the course.
Order Online!
Signalized Intersection Safety This webinar-on-CD will focus on the how traffic signals should be designed and operated to maximize safety for the road user. Up to date information about signal phasing, timing and detection will be provided. A variety of geometric layouts for signalized intersections will be illustrated including the innovative Continuous Flow intersection. The webinar also will discuss various safety types of railroad crossings. The seminar is co- sponsored by ASCE's Transportation & Development Institute and ASCE Continuing Education.
0.1 CEUs. $75M/$125NM. 66995
To review entire brochure in PDF Format.
Order Online!
Traffic Calming – 2 Part Series Although many agencies have been using traffic calming strategies for many years, the results have been mixed. This is because a lot of agencies failed to put into place a comprehensive set of procedures for process requests from the public to address neighborhood traffic management issues. This webi-nar-on-CD provides information on how to establish a neighborhood traffic management process including the development of a manual, how this process should be administered, the issues involving the primary stakeholders, and where the pitfalls lie. Includes a case study. This webinar-on-CD is cosponsored by ASCE's Transportation & Development Institute and ASCE Continuing Education. 2 hours.
0.2 CEUs. $149M/$249NM. CD02
Order Online!
Unpaved Low Volume Road Design, Construction and Maintenance This course gives training in all aspects of unpaved roads. Construction procedures, maintenance, erosion control, choice of soils, stream crossings, surface treatments, and more. Emphasis is on cost-effective design and construction. Very practical course. The course is for State DoTs, County Engineers, US/State Forest Service, US/State Parks departments, timber/mining industry engineers, professional engineers, consultants, and contractors. 9 hours.
0.9 CEUs. $432/$13771. 7V04K
Order Online!
Work Zone Traffic Control The design of work zone traffic control plans and the safe operation of work zones on site are emphasized in this video. This video program presents nationally accepted standards and criteria, as well as good practices from around the country. A wide range of technical material is presented in an easy to understand format. 6.5 hours.
6.5 PDHs. $395 M/$495 NM. V50
To review entire brochure in PDF Format.
Order Online!
1 = Individual Price/Organization Price. If purchased at the individual price, the tape may be used solely by the individual for educational purposes. It may not be duplicated, sold or rented to others.
